

Wi-Fi Repeater User Guide

To make the Wi-Fi repeater work, please follow the procedure below:

0. Install Smart Repeater to your phone.

Download the Smart Repeater.

Connect your phone to the PC, and use the following command to install it.

adb install smartRepeater_Wxx.xx.x.apk

1. Power on the board by connect UART0 to your PC/AC adapter.

2: Open Smart Repeater and connect to the board through BLE.

Tap the scan button.

Choose uwp566X_XXXX, and wait for the connection.

3. Configure Wi-Fi Station by Smart Repeater.

Tap the menu button, and choose WiFi Manager.

Tap OPEN WIFI.

Tap WIFI SCAN, and wait for the scanning.

Tap the drop-down menu, and select the target router.

Enter the password.

Tap CONNECT, and wait for the connection.

4. Configure Wi-Fi AP by Smart Repeater.

After the connection is completed, tap START AP.

At last, Remember the AP’s MAC.

Note:

• STA should be connected before starting AP.
• When STA is connected to any AP, the green light will be turned on.
• When AP is started, the blue light will be turned on.
• When both green and blue light are turned on, the Wi-Fi repeater is ready to work.
• The repeater's SSID is UNISOC_XXXXXX by default, while XXXXXX is the NIC of AP’s MAC.
• The repeater's password is the same as the router's by default.

Now you can connect your phone to the repeater, and open any website in the browser to check whether the repeater works.